Trends in welding: knowledge about welding in the staff of the company "Metal Mecánica Antonio Tirado" located in the city of Ambato Panamericana Norte Km 7

Authors

  • Luis Jheovanny Reyna Tenorio Facultad de Ingenierías de la Universidad Técnica Luis Vargas Torres de Esmeraldas-Ecuador
  • Raúl Clemente Ulloa-de Souza Facultad de Ingenierías de la Universidad Técnica Luis Vargas Torres de Esmeraldas-Ecuador
  • Byron Fernando Chere-Quiñónez Facultad de Ingenierías de la Universidad Técnica Luis Vargas Torres de Esmeraldas-Ecuador https://orcid.org/0000-0003-1886-6147

DOI:

https://doi.org/10.51798/sijis.v3i3.523

Keywords:

Fusion welding, knowledge, welding

Abstract

The objective of this research article was to analyze the knowledge of the workers of the company "Metal Mecánica Antonio Tirado" located in the city of Ambato Panamericana Norte Km 7 about welding Methodology the method was inductive, the type of research was descriptive, documentary and field The population in this investigation was constituted by the 20 employees of the company "Metal Mecánica Antonio Tirado" The sample: was randomly selected, the only criterion being the desire to be part of this study, being constituted by 20 employees The technique and instrument of survey data collection, the instrument was the questionnaire, which was subjected to processes of calculation of validity and reliability, yielding 0.97. Descriptive statistics were used for data analysis. Result: The staff that works does not have sufficient knowledge about welding (54%), nor about the standards used for the handling of welding (60%); a small percentage of them have received training in this area, being in 55.55% of the cases through courses

Author Biographies

Luis Jheovanny Reyna Tenorio, Facultad de Ingenierías de la Universidad Técnica Luis Vargas Torres de Esmeraldas-Ecuador

Facultad de Ingenierías de la Universidad Técnica Luis Vargas Torres de Esmeraldas-Ecuador

Raúl Clemente Ulloa-de Souza, Facultad de Ingenierías de la Universidad Técnica Luis Vargas Torres de Esmeraldas-Ecuador

Facultad de Ingenierías de la Universidad Técnica Luis Vargas Torres de Esmeraldas-Ecuador

Byron Fernando Chere-Quiñónez, Facultad de Ingenierías de la Universidad Técnica Luis Vargas Torres de Esmeraldas-Ecuador

Facultad de Ingenierías de la Universidad Técnica Luis Vargas Torres de Esmeraldas-Ecuador

References

Abedi, S. (2017). Failure investigation of a defective weldment of an oil product transmissionpipeline . J. Fail. Anal. Prev, https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjnk7j98sL6AhUhSTABHYuWB8YQFnoECAgQAQ&url=https%3A%2F%2Fur.booksc.me%2Fbook%2F64005460%2Fdaac76&usg=AOvVaw2Rg_EnYDFoPQh_WxlCn7Ua.

Almaguer‐Zaldivar, P.; Estrada‐Cingualbres, R. (2015) Evaluación del comportamiento a fatiga de una unión soldada a tope de acero AISI 1015. Ingeniería Mecánica. 18 (1): 31-41,. https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjOsNuf_ML6AhUETTABHS7wCQ4QFnoECAMQAQ&url=https%3A%2F%2Fwww.researchgate.net%2Fpublication%2F317517589_Evaluacion_del_comportamiento_a_fatiga_de_una_union_soldada_a_tope_de_acero_AISI_1015&usg=AOvVaw14AbzjZY4knP8bIJC_r8oK

Andrade, G., Domínguez, A., Domínguez, J., & et al. (2014). Técnicas de recolección y registro de datos. https://www.monografias.com/trabajos100/tecnicas-documental/tecnicas-documental2.

AWS. (22 de JULIO de 2001). INSI/AWS A3.0:2001 Una Norma Nacional Americana Norma de Términos y Definiciones de Soldadura. Obtenido de INSI/AWS: https://docplayer.es/64026768-Ansi-aws-a3-0-2001-una-norma-nacional-americana-norma-de-terminos-y-definiciones-de-soldadura.html

Cabot, P. (2018). Serie: hojitas de conocimiento Tema: MATERIALES Enfoque: Universitario. IEDS, https://www.cnea.gob.ar/nuclea/bitstream/handle/10665/1152/cnea_mdidact_ieds_hojitas_materiales-16_p307-308.pdf?sequence=1&isAllowed=y.

Castro, J., & Cendales, E. (2019.). Casos aplicados del análisis de causa raíz: revisión. Revista Ciencia e Ingeniería Neogranadina, https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjFuJvZ88L6AhWWZTABHULEDckQFnoECAoQAQ&url=https%3A%2F%2Frevistas.unimilitar.edu.co%2Findex.php%2Frcin%2Farticle%2Fview%2F3197&usg=AOvVaw2wyaz6YzwqY1fWwJMnhN4n.

Duarte, C., Espejo, E., & Martinez, J. (2017 ). Failure analysis of the wall tubes of a water-tube boiler. Engineering Failure Analysis., https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiQqoST9ML6AhWFRTABHWqxDZ4QFnoECAgQAQ&url=https%3A%2F%2Fwww.researchgate.net%2Fpublication%2F316745056_Failure_analysis_of_the_wall_tubes_of_a_water-tube_boiler&usg=AO.

Fernández-, T., Rodríguez, I., & Alcántara, D. (2017). Procesos metalúrgicos y tecnológico de la soldadura. .. (Vols. https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwi8o7y-9cL6AhWJQjABHTj8AKcQFnoECAIQAQ&url=https%3A%2F%2Fwww.researchgate.net%2Fpublication%2F263846824_Tensiones_de_contacto_por_el_Metodo_de_Elementos_Finitos_del_ace). España: Editorial Académica Española.

Franco, R., Loaiza, G., Lean, P., & Yépez, H. (2017). A one way coupled thermo-mechanical model to determine residual stresses and deformations in butt welding of two ASTM A36 steelplates. . Coupled Problems in Science and Engineering, https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjt0b6T9sL6AhVhSzABHbOxB-wQFnoECA0QAQ&url=https%3A%2F%2Fupcommons.upc.edu%2Fbitstream%2Fhandle%2F2117%2F190678%2FCoupled-2017-67-A%2520one%2520way%2520coupled.pdf&usg=.

Finol, T., & Nava, H. (2001). Procesos y Productos en la Investigación Documental. Maracaibo, Zulia, Venezuela: EDILUZ. ISBN 980-232-388-8. 2a edición. pp.298.

Hernández, F., & Baptista. (2014). Metodología de la Investigación (6ta edición). México.

Kumar, S.; Shahi, A. (2015).. Studies on metallurgical and impact toughness behaviour of variably sensitized weld metal and heat affected zone of AISI 304L welds. Materials and Design, Elsevier. 89 (9): 399-412, https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjqo5eH-ML6AhWCQjABHRiVC8cQFnoECAcQAQ&url=https%3A%2F%2Fwww.sciencedirect.com%2Fscience%2Farticle%2Fpii%2FS0264127515305542&usg=AOvVaw1wviwpLttYaqVGBq5KuYOa

Organización Internacional del Trabajo (OIT). (2012). Investigación regional: tendencias en la demanda de competencias sectoriales en países seleccionados de América Latina. Gine-bra: OIT

Palella, S., & Martins, F. (2012). Metodología de la Investigación Cuantitativa. Caracas, Venezuela: Fondo Editorial de la Universidad Pedagógica Experimental Libertador (FEDEUPEL).

Pichardo, B.; López, V.; Hernández, R.; Salazar, M. (2019) Microestructura y propiedades mecánicas de una junta soldada de placas bicapa API X60/316L. Avance Científico. VII (2), 135-145,

Tecnologica, A. (27 de 09 de 2022). TIPOS DE SOLDADURA. Obtenido de AREATECNOLOGICA : https://www.areatecnologia.com/tipos-de-soldadura.htmlhttps://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjZ1_CM-8L6AhWYTjABHQ7WCCEQFnoECAcQAQ&url=http%3A%2F%2Fwww.itchetumal.edu.mx%2Fimages%2F2019%2F12DICIEMBRE%2FAVACIENT%2F2%2F14.pdf&usg=AOvVaw27e2HmVmSGCx0ww3gg7BGx

UNE-EN ISO . (2011). Soldeo y técnicas conexas. Nomenclatura de procesos y números de referencia. . https://upcommons.upc.edu/bitstream/handle/2117/179179/146953_FNB%20TFG%20DEF.pdf: UNE.

Published

2022-06-30

How to Cite

Reyna Tenorio, L. J. ., Ulloa-de Souza, R. C. ., & Chere-Quiñónez, B. F. . (2022). Trends in welding: knowledge about welding in the staff of the company "Metal Mecánica Antonio Tirado" located in the city of Ambato Panamericana Norte Km 7. Sapienza: International Journal of Interdisciplinary Studies, 3(3), 229–237. https://doi.org/10.51798/sijis.v3i3.523

Issue

Section

Continuous flow- Articles, Essays, Professional Case Studies